Registration in NSW
NEWS UPDATED (UPDATED 02.10.2014)
National
Guidelines for Construction & Modification of Street Rods in Australia
(NSRG
V.2.0 – 1 December 2013)
This
document must be used in conjunction with the NSW supplement to the second
edition of the National Guidelines for the Construction and Modification of
Street Rods in Australia. By using and staying within the boundaries of these
two documents will gain you full registration in NSW.
Click
on links below
http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/street_rod.aspx
(The NSW supplement to the second edition of the
National Guidelines for the Construction and Modification of Street Rods in
Australia officially released by the RMS).
Guidelines
for Modifying your Production Vehicle
Vehicles
Standard Bulletin 14 (VSB14)
Vehicle
Standard Bulletin 14 (VSB14) is a recognised Code of Practice for Modified
Vehicles in NSW .
Click
on link below
http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/vsb_ncop.aspx
A
Guide to Modification Requirements for Certification
Vehicle
Standards Information 6 (VSI6)
Vehicle
Standard Information 6 (VSI6) is a document that will verify if your vehicle
modifications will require certification or no certification.
Click
on link below
Road
Transport (Vehicle Registration) Regulation 2007
Vehicle
Standards Schedule 2
This
Regulation is the basis of all vehicles registered in NSW. This document is used
in conjunction with the relevant Australian Design Rules (ADR’s) and Codes of
Practice applicable to the vehicle.
Click
on link below
http://www.legislation.nsw.gov.au/maintop/view/inforce/subordleg+522+2007+cd+0+N
Means
to Demonstrate Compliance with Australian Design Rules (ADR’s)
As
per the title this document gives the Vehicle Builder and Certifier alternative
means to demonstrate compliance to the Australian Design Rules (ADR’s).
Click
on link below
Brake Assessment Manual – October 2013
This
document was developed as an alternative to the full Australian Design Rules (ADR)
Tests. This is now the Brake Test Document for certifying Vehicles in NSW.
Click
on link below
http://roadsafety.transport.nsw.gov.au/downloads/brake_assessment_manual2013.pdf
Australian Design Rules – ADR’s
This
is a full list of the Australian Design Rules (ADR’s). You will need to click
and open which edition you require. Third Edition is the current Australian
Design Rules (ADR’s).
Click
on link below
http://www.infrastructure.gov.au/roads/motor/design/index.aspx
Roads & Maritime
Click
on the link below
Modified
and non-standard vehicles
Regarding the NSRG, I was hoping the gazetting of the document
through NSW Transport/RMS would be a little quicker, but as we are all getting
used to how the snail trail works through these departments as you can guess
things have not moved that fast.
One good thing out of the slow process is that the
Section called “Legal” has in their good heart decided that the Regulation
should be changed, in layman’s terms once this has been done this Registration
Scheme is embedded in legislation pretty much forever opposed to most changes
or new arrangements through NSW Transport/RMS it is usually done as an Order
which can be changed or dropped at any given time, this is huge and
unprecedented. (There is no other Registration Scheme added to the
Regulations).
The
latest correspondence I received was yesterday informing me that they, the NSW
Transport/RMS, hope to have the Street Rod Notice in place so that the Standard
can commence on the 1st of August 2014, at
least we now have a possible starting date in our sights
******Media
Release******
NSW
Registration Guidelines for Street Rods – Full Registration
http://www.transport.nsw.gov.au/media-releases/new-standard-grant-street-rods-full-registration
This page will be updated from time to time
Last updated 02.10.2014
Copyright 2014