*** THE 1934 SPECIAL ***
Our 1934 SPECIAL is a modified 1934 3 Window Coupe.
Elvis started of using one of our standard 1934 3 Window Coupes out of the mould which has a 3 inch chop.
He cut the entire windscreen frame area out and added 2 inches into it.
(therefore if you use get a standard height windscreen frame you will only have to chop it 1 inch).
He then pie-cut from the B Pillar around to the back window, the rear window is still our standard 3 inch chop window,
the back area of the roof has not been chopped.
Elvis then laid the windscreen frame back some 5 inches tilting the roof down to match the lay-back windscreen.
By doing this the front section of the roof has been lowered an extra 2 inches in height,
however by having less crown above the front window and extending the windscreen frame area by 2 inches
has given you the same vision from the drivers seat as you would have with our standard 2 inch chopped body.
Owner & builder of this 1934 Special – Russell & Maxine Bryce
Our 1934 Special has the same inclusions as all our standard bodies:
Fully Steeled out
Standard as Hidden Hinge
Standard Reproduction Window Regulators
Recessed Firewall and Tunnel built into Body
Burst Proof Door Locks and Anti Intrusion in Doors
Full Fibreglass Floor with Gloss Gel coat finish under Body
Boot swung with laser cut Aluminium Hinges, Gas Struts and locking
Window Garnish Moulds supplied
New Outer Door Handles
Exposed Hinges at an additional cost of $770.00
As you can see in the next two photo’s the chop has now been glassed inside and outside, still needs a couple of glass repairs in the smaller areas and the body has now been steeled out
We have not started working on the doors
We will be updating the progress of this New Body Style regularly so please stay tuned
We are progressing on the "New 34 Special" slowly, drivers door has now been reshaped and have started on the other door, the inner door has been chopped up and swung, steel reinforced, hope to get the outer skin on it early next week, have cut a windscreen frame and have started to fine tune the windscreen area.
We will continue to keep you updated on progress
Acan has been placed in some of the pictures to give some idea of the contrast of height, also passenger side door has now been reshaped
Plug Body has been painted – will start taking mould next week
Starting the mould
We won’t bore you with the pictures of taking the mould but below are pictures of us taking the mould of the plug body
THIS BODY STYLE IS SELLING FAST – LIMITED EDITION